Flat roofs are the most common of all types of roofs today.

Although you will find them in many places across the country, they are most prevalent in areas that receive less rain throughout the year.

This is because they are not watertight, and are not able to withstand high levels of moisture.

They accumulate a lot of water during the rainy seasons, and they face a myriad of leakage problems.

Most homeowners go for this type of roofs because they are highly pocket-friendly. In order to reduce water damage, most good roofing contractors install functional drainage systems and quality waterproof covers.

Despite the fact that they are not the best roofs in the modern market, they are still a great choice for many, and they can serve you for a long time if all is done right during the installation phase.

Below are some of the most commonly used flat roofs.

The Built-up Roof (BUR)

Traditionally, these types of roofs were made from hot tar and gravel.

They were carefully crafted with multiple plies of waterproof materials that were alternated with hot tar and covered with a layer of fine river stone.

Today, manufacturers are using more advanced and better products in such as fiberglass membranes to ensure maximum functionality, durability, resistance, and curb appeal.

BUR is highly fire resistant and will remain intact in case of a fire. It is also a cheap and attractive option for homeowners seeking to get the best out of their roofing projects without paying a hefty price tag.

The downside of this roof is that it is heavier than other flat roof types, therefore requires a lot of labor to install.

Installing them can also be a bit messy and smelly.

It is difficult to install this roofing type; hence you will need to seek the services of a professional.

When leaks occur, it is difficult to find their sources, and the gravel in them can easily clog scuppers and gutters.

The Modified Bitumen

By Htm (Own work) [CC BY-SA 3.0 (https://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons

This roof is made from a single ply rolled roof armed with a mineral-based wear surface.

They are easy to install, and if you are a DIY fanatic, you can attempt installing them as one of your fun projects.

It is also energy efficient owing to the fact that it has a light-mineral surface that reflects light; hence helping you save a lot on your monthly energy bills. It is also affordable.

On the flip side, the modified bitumen is not fire resistant, and you should avoid using it in occupied buildings.

The rubber membrane

This type of flat roofing is made from ethylene propylene diene monomer (EPDM) which is pure rubber.

It is a durable material that is perfectly engineered to resist solar damage.

What’s more, the rubber membrane roofing can be blasted with stone, glued, or mechanically moored with a broad range of available fasteners

They are easy to install and you can attempt them by yourself. You can also easily find the source of leaks and patch them.

They are, however, made of a black material that retains a lot of heat; hence you need to add bright coatings that will make installation a bit more expensive.

If you want flat roofing that you can take pride in, consider working with professional roofing contractors, even if the roofing type is easy to install. You will always get the best results.

Leave a Reply

Your email address will not be published. Required fields are marked *